CNC 4th Axis
I had a go at some manual carving and all seems well.
Thursday, 28 April 2016
I had a go at some manual carving and all seems well.
Subscribe to:
Post Comments (Atom)
RSS
Posts
Comments
I had a go at some manual carving and all seems well.
Popular Posts
-
Miele Induction Hob Problem We've had a Miele KM5731 for nine years or so, it took a while for me to fit it after we bought it, so it... -
Transputer: Stack Based With OS in Hardware Picoputer: RP Pico Hardware Transputer The transputer was and still is an odd beast. It has h...
-
All Gauges Attached to DRO The remaining gauges have been attached to the DRO. There's now 3 gauges on the lathe and three on the mi... -
The Wet Phone Affair ( or, How to Make Your Own SD Card) One paddling pool plus one phone equals one project. After the phone was dried... -
Z80 Arduino Using Mega as Debugger Ever since the 80's I've wanted to build a Z80 computer. I even bought the chips, but never us... -
Making a Night Light from an IKEA LED Lamp After a request for some night lights I remembered that I had some IKEA motion sensitive LED l... -
What do you do if you want to dump the ROM in some equipment that is owned by someone else, who is happy to have their ROMs dumped, but who... -
Olympus BHM Microscope LED Light The BHM microscope that I bought recently was fitted with a light source that was an incandescent bulb. ... -
Prinztronic Calculator I didn't have much interest in this calculator until I took it apart. Modern calculators are very cost c... -
Miele T230C Tumble Dryer De-Problem Being woken up by a clacking clanking scraping sound (CCSS from now on) normally means the little one...
RSS Subscribe
Posts
Comments
Subscribe To
Posts
Comments
No comments:
Post a Comment